| ENGINES AVAILABLE NOW |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
828-212-4664
| Honda Open Motor - $3500.00 Raised Deck, 14.5 cu in, everything new or fresh, New Billet Flywheel, includes pipe & muffler. |
| Tecumseh H50 Open - Billet flywheel, bolt-on fins, head, sideplate, girdle, long rod, manifold & starter nut. Briggs ignition, good mod cam, 368 blueprinted Tillotson carb, ported, exhaust pipe. AS IS $1250.00 Smoking Deal! |
| Tecumseh 5hp Controlled Stock - Ported, includes billet rod, race cam, chain guard, clutch, carb and pipe. May need rebuild, AS IS $750.00 |
| Tecumseh OHV 358cc. Another awesome deal from Mike Clements. $2700.00 |
| Tecumseh OHV 398cc, ain't she a beauty! Welded tunnel ports, 35mm carb, billet aluminum flywheel, billet sideplate & plenty of horsepower! $3000.00 firm |
Big Bore, Stroker 305 Briggs engine with billet big valve
head and billet side plate. It comes with all the good stuff
necessary to win. Including the full motor mount, jackshaft set
up, 3 disc clutch, and outboard crank bearing support. Carb
is 38mm Mikuni. Engine is guaranteed to get the job done !
Incredible Deal $4500 Race Ready!
| New Listings! |
This is the Billet Beast. We bought a
kit engine from the manufacture of these
components and proceeded to use our
own cam profile, carb drill pattern,
rocker ratios, and bore, stroke and rod
ratio. What we end up with is more HP
than you can hook up. The engine is
28.86 cubic inches or 476cc's. It has
been de-tuned to 52hp to help you get
your chassis hooked. If you would like
60+ hp, we can and will tune it for that
before shipping it to you. You will have
to figure out your own traction problems
though ! Race Ready with outboard
bearing support and all updates $5000
kit engine from the manufacture of these
components and proceeded to use our
own cam profile, carb drill pattern,
rocker ratios, and bore, stroke and rod
ratio. What we end up with is more HP
than you can hook up. The engine is
28.86 cubic inches or 476cc's. It has
been de-tuned to 52hp to help you get
your chassis hooked. If you would like
60+ hp, we can and will tune it for that
before shipping it to you. You will have
to figure out your own traction problems
though ! Race Ready with outboard
bearing support and all updates $5000